DLPR910 datasheet(11/16 Pages) TI1

11 / 16 page

DLPR910

2514595-

0001

Pin 1

DLPR910

www.ti.com

DLPS065A – SEPTEMBER 2015 – REVISED OCTOBER 2015

9 Power Supply Recommendations

The DLPR910 uses two power supply rails as shown in Table 1.

Table 1. DLPR910 Power Supply Rails

SUPPLY

POWER PINS

COMMENTS

All VCCINT pins must be connected with a 0.-uF

1.8 V

VCCINT1, VCCINT2, and VCCINT3

decoupling capacitor to GND.

All VCCO and VCCJ pins must be connected with a 0.1-

3.3 V

VCCO1,VCCO2,VCCO3, VCCO4, and VCCJ

uF decoupling capacitor to GND.

10 Layout

10.1 Layout Guidelines

The DLPR910 is part of a multi-chipset solution, and it is required to be coupled with the DLPC910 for reliable

operation of the DLP9000XFLS DMD. Refer to the DLPC910 datasheet listed in Related Documentation for a

layout example for this multi-chipset solution.

11 Device and Documentation Support

11.1 Device Support

11.1.1 Device Nomenclature

Table 2. Part Number Description

TI PART NUMBER

DESCRIPTION

REFERENCE NUMBER

DLPR910YVA

DLPR910 Configuration PROM

2514595-0001

11.1.2 Device Markings

Figure 4. DLPR910 Device Markings

Submit Documentation Feedback

Product Folder Links: DLPR910

DLPR910 数据表(PDF) 11 Page - Texas Instruments

DLPR910 数据表(HTML) 11 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

数据表下载