L6362A

Pin description

DocID027660 Rev 4

9/37

2.7

OL

This pin has an open drain structure and is active low. The open drain is active in case of

overload (current limitation). It can be used by the host microcontroller to detect an IO-Link

wake-up request event.

2.8

VCC

IC supply voltage.

2.9

OUTH

This pin is the output of the high-side power transistor.

2.10

OUTL

This pin is the output of the low-side power transistor.

2.11

I/Q

Input pin of the integrated receiver. The level of the signal on the I/Q pin is transferred to

the OUTI/Q pin, according to the receiver thresholds defined in Table 8: "Output stage",

and truth table see Table 14: "Output stage truth table", connect to GND if it is not used.