| 数据搜索系统,热门电子元器件搜索 |
|
R5973AD 数据表(PDF) 27 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
R5973AD 数据表(HTML) 27 Page - STMicroelectronics |
|
27 / 38 page ![]() DocID027027 Rev 1 27/38 R5973AD Application information 38 considering TON that has been already reduced to its minimum. Equation 31 considering that fSW has been already reduced to one third of the nominal. In case a short-circuit at the output is applied and VIN = 12 V the inductor current is controlled in most of the applications (see Figure 15). When the application must sustain the short-circuit condition for an extended period, the external components (mainly the inductor and diode) must be selected based on this value. In case the VIN is very high, it could occur that the ripple current during TOFF (Equation 31) does not compensate the current increase during TON(Equation 30). Figure 17 shows an example of a power-up phase with VIN = VIN MAX = 36 V whereIL TON > IL TOFF, so the current escalates and the balance between Equation 30 and Equation 31 occurs at a current slightly higher than the current limit. This must be taken into account in particular to avoid the risk of an abrupt inductor saturation. Figure 15. Short-circuit current VIN = 12 V IL TOFF VD Vout DCRL I ++ – L --------------------------------------------------------------- 3T SW VD Vout DCRL I ++ – L --------------------------------------------------------------- 6 s = |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |