RT2903H

Electrical characteristics

DocID026955 Rev 1

5/11

3

Electrical characteristics

CC

Symbol

Parameter

Test conditions

Min.

Typ.

Max.

Unit

Input offset voltage

(1)

1

7

mV

15

Input offset current

5

50

nA

150

Input bias current

(2)

25

250

400

L

25

200

V/mV

Supply current

(all comparators)

0.4

1

mA

1

2.5

Differential input voltage

(3)

+

V

Low level output voltage

250

400

mV

800

High level output current

0.1

nA

1

µA

Output sink current

6

16

mA

2

1.3

µs

Large signal response time,

Output signal at 50 % of final value

500

ns

Output signal at 95 % of final value

1

µs

Notes:

(1)

+

from 5 V to 30 V, and over the full input common-mode range

+

) – 1.5 V).

(2)

The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of

the state of the output, so there is no load charge on the reference of input lines.

(3)

Positive excursions of input voltage may exceed the power supply level. As long as the other voltage remains within the

common-mode range, the comparator provides a proper output state. The low input voltage state must not be less than –0.3 V

(or 0.3 V below the negative power supply, if used)

(4)

The response time specified is for a 100 mV input step with 5 mV overdrive.

(5)

Maximum values are guaranteed by design and evaluation.