L5963D-EHT datasheet(21/45 Pages) STMICROELECTRONICS

部件名	L5963D-EHT

功能描述	Dual monolithic switching regulator with LDO and HSD

PDF	45 Pages

Scroll/Zoom	100%

制造商	STMICROELECTRONICS [STMicroelectronics]

网页	http://www.st.com

标志

21 / 45 page

DocID028553 Rev 1

21/45

L5963

Functional Description

Figure 11. Enable timing for linear regulator (pin ENLDO isn't connected to VINLDO)

The linear regulator operates with output voltages down to 1.2 V, and offers a maximum

dropout voltage of 500 mV at rated load current.

This regulator has an independent thermal protection and a current-limiting circuit.

It should be always supplied (by VINLDO) with a voltage not lower than 3.5 V because, even

if not used, it gives the common supply to all internal blocks which have to stay alive when

the battery drops too low (backup functionality).

6.2.11

High-side driver (HSD)

The HSD pin is the output of the high side driver. It has a dedicated enable pin ENHSD.

Following protections are implemented:



Over-current protection



Short to supply



Short to ground



Short through the load to -1 V



Unpowered short to supply



Loss of ground



Over voltage protection

L5963D-EHT 数据表(PDF) 21 Page - STMicroelectronics