| 数据搜索系统,热门电子元器件搜索 |
|
TS3USB3000RLSR 数据表(PDF) 4 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TS3USB3000RLSR 数据表(HTML) 4 Page - Texas Instruments |
|
4 / 26 page ![]() TS3USB3000 SCDS337B – DECEMBER 2012 – REVISED DECEMBER 2015 www.ti.com 6 Specifications 6.1 Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted) (1) (2) MIN MAX UNIT VCC Supply voltage(3) –0.3 5.5 V VI/O Input/Output DC voltage(3) –0.3 5.5 V VD- D- DC voltage(4) –0.3 9 V VI Digital input voltage (SEL, /OE) –0.3 5.5 V IK Input/Output port diode current VI/O < 0 –50 mA IIK Digital logic input clamp current(3) VI < 0 –50 mA ICC Continuous current through VCC 100 mA IGND Continuous current through GND –100 mA Tstg Storage temperature –65 150 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. (3) All voltages are with respect to ground, unless otherwise specified. (4) This rating only applies to the D- pin with respect to GND. VCC must be powered within the recommended operating conditions of 2.7 V to 4.3 V and the /OE pin must be logic high for this rating to be applicable. Any condition where VCC is unpowered or the /OE pin is not high must reference the rest of the Absolute Maximum Ratings Table. 6.2 ESD Ratings VALUE UNIT Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±3500 Electrostatic V(ESD) V discharge Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±1000 (1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. (2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. 6.3 Recommended Operating Conditions MIN MAX UNIT VCC Supply voltage 2.7 4.3 V VI/O (USB) Analog voltage 0 3.6 V VI/O (MHL) VI Digital input voltage (SEL, OE) 0 VCC V TRAMP (VCC) Power supply ramp time requirement (VCC) 100 1000 μs/V TA Operating free-air temperature -40 85 ºC 4 Submit Documentation Feedback Copyright © 2012–2015, Texas Instruments Incorporated Product Folder Links: TS3USB3000 |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |