SLE 55R08 Short Product Information

Ref.: SPI_SLE55R08_0101.doc

Revision History:

Current Version 2001-01-31

Previous Releases:

Page

Subjects (changes since last revision)

Important: Further information is confidential and on request. Please contact:

Infineon Technologies AG in Munich, Germany,

Security & Chip Card ICs,

Tel +49 - (0)89 / 234-80000

Fax +49 - (0)89 / 234-81000

E-Mail: security.chipcard.ics@infineon.com

Published by Infineon Technologies AG, CC Applications Group

St.-Martin-Strasse 76, D-81541 München

© Infineon Technologies AG 2001

All Rights Reserved.

To our valued customers

We constantly strive to improve the quality of all our products and documentation. We have spent an exceptional

amount of time to ensure that this document is correct. However, we realise that we may have missed a few things. If

you find any information that is missing or appears in error, please use the contact section above to inform us. We

appreciate your assistance in making this a better document.

Attention please!

The information herein is given to describe certain components and shall not be considered as warranted

characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding

circuits, descriptions and charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon

Technologies Office in Germany or our Infineon Technologies Representatives world-wide (see address list).

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in

question please contact your nearest Infineon Technologies Office.

Infineon Technologies Components may only be used in life-support devices or systems with the express written

approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of

that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices

or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect

human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.