MSP430F5259IRGCT datasheet(21/112 Pages) TI1

21 / 112 page

MSP430F5259, MSP430F5258, MSP430F5257, MSP430F5256

MSP430F5255, MSP430F5254, MSP430F5253, MSP430F5252

www.ti.com

SLAS903B – MAY 2013 – REVISED NOVEMBER 2015

5.11 Leakage Current – General-Purpose I/O DVCC Domain

(P5.0 to P5.5, P6.0 to P6.7, PJ.0 to PJ.3)

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)

PARAMETER

TEST CONDITIONS

VCC

MIN

MAX

UNIT

Ilkg(Px.y)

High-impedance leakage current

See (1)(2)

1.8 V, 3 V

–50

(1)

The leakage current is measured with VSS or VCC applied to the corresponding pins, unless otherwise noted.

(2)

The leakage of the digital port pins is measured individually. The port pin is selected for input and the pullup or pulldown resistor is

disabled.

5.12 Leakage Current – General-Purpose I/O DVIO Domain

(P1.0 to P1.7, P2.0 to P2.7, P3.0 to P3.4, P4.0 to P4.7, P7.0 to P7.5)

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)

PARAMETER

TEST CONDITIONS

VIO

(1)

MIN

MAX

UNIT

Ilkg(Px.y)

High-impedance leakage current

See (2)(3)

1.62 V to 1.98 V

–50

(1)

In all test conditions, VIO ≤ VCC.

(2)

The leakage current is measured with VSS or VIO applied to the corresponding pins, unless otherwise noted.

(3)

The leakage of the digital port pins is measured individually. The port pin is selected for input and the pullup or pulldown resistor is

disabled.

5.13 Outputs – General-Purpose I/O DVCC Domain (Full Drive Strength)

(P5.0 to P5.5, P6.0 to P6.7, PJ.0 to PJ.3)

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)

PARAMETER

TEST CONDITIONS

VCC

MIN

MAX

UNIT

I(OHmax) = –3 mA

(1)

VCC – 0.25

VCC

1.8 V

I(OHmax) = –10 mA

(2)

VCC – 0.60

VCC

VOH

High-level output voltage

I(OHmax) = –5 mA

(1)

VCC – 0.25

VCC

3 V

I(OHmax) = –15 mA

(2)

VCC – 0.60

VCC

I(OLmax) = 3 mA

(1)

VSS VSS + 0.25

1.8 V

I(OLmax) = 10 mA

(2)

VSS VSS + 0.60

VOL

Low-level output voltage

I(OLmax) = 5 mA

(1)

VSS VSS + 0.25

3 V

I(OLmax) = 15 mA

(2)

VSS VSS + 0.60

(1)

The maximum total current, I(OHmax) and I(OLmax), for all outputs combined should not exceed ±48 mA to hold the maximum voltage drop

specified.

(2)

The maximum total current, I(OHmax) and I(OLmax), for all outputs combined should not exceed ±100 mA to hold the maximum voltage

drop specified.

Specifications

Submit Documentation Feedback

Product Folder Links: MSP430F5259 MSP430F5258 MSP430F5257 MSP430F5256 MSP430F5255 MSP430F5254

MSP430F5253 MSP430F5252

MSP430F5259IRGCT 数据表(PDF) 21 Page - Texas Instruments

MSP430F5259IRGCT 数据表(HTML) 21 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

MSP430F5259IRGCT 数据表(PDF) 21 Page - Texas Instruments

MSP430F5259IRGCT 数据表(HTML) 21 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载