PI49FCT807T datasheet(2/6 Pages) PERICOM

2 / 6 page

PI49FCT807/2807T

Fast CMOS Clock Driver

PS7008C

06/26/01

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012

DC Electrical Characteristics (OvertheOperating Range, TA =40°Cto+85°C, VCC =5.0V±5%)

Parameters Description

TestConditions(1)

Min.

Typ.(2)

Max.

Units

VOH

OutputHIGHVoltage

VCC=Min.,VIN=VIHorVIL

IOH=15.0mA

2.4

3.3

IOH=48.0mA

0.2

0.5

VOL

Output LOW Current

VCC=Min.,VIN=VIHorVIL

IOL=12mA(25Ω)

0.2

0.5

VIH

InputHIGHVoltage

GuaranteedLogicHIGHLevel

2.0

VIL

Input LOW Voltage

GuaranteedLogicLOWLevel

0.8

IIH

InputHIGHCurrent

VCC=Max.

VIN=2.7V

µA

IIL

Input LOW Current

VCC=Max.

VIN=0.5V

µA

InputHIGHCurrent

VCC=Max.,VIN=VCC(Max.)

µA

VIK

ClampDiodeVoltage

VCC = Min., IIN = 18mA

0.7

1.2

IOS

Short Circuit Current

VCC=Max.(3),VOUT=GND

120

225

IOFF

Power Down Disable

VCC=GND,VOUT=4.5V

100

µA

Input Hysteresis

150

Capacitance (TA=25°C,f=1MHz)

Parameters(4)

Description

TestConditions

Typ.

Max.

Units

CIN

Input Capacitance

VIN=0V

6.0

COUT

Output Capacitance

VOUT=0V

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

2. Typical values are at Vcc = 5.0V, +25°C ambient and maximum loading.

3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

4. This parameter is determined by device characterization but is not production tested.

Storage Temperature ...........................................................65°C to +150°C

Ambient Temperature with Power Applied............................ -40°C to +85°C

Supply Voltage to Ground Potential (Inputs & Vcc Only) ..... 0.5V to +7.0V

Supply Voltage to Ground Potential (Outputs & D/O Only) .. 0.5V to +7.0V

DC Input Voltage .................................................................. 0.5V to +7.0V

DC Output Current ............................................................................. 120mA

Power Dissipation .................................................................................. 0.5W

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the de-

vice. This is a stress rating only and functional opera-

tion of the device at these or any other conditions

above those indicated in the operational sections of

this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may

affect reliability.

MaximumRatings

(Above which the useful life may be impaired. For user guidelines, not tested.)

PI49FCT807T 数据表(PDF) 2 Page - Pericom Semiconductor Corporation

PI49FCT807T 数据表(HTML) 2 Page - Pericom Semiconductor Corporation

Html Pages

1 2 3 4 5 6

数据表下载