2

SCD8657 Rev K 5/15/12

Aeroflex Plainview

ABSOLUTE MAXIMUM RATINGS

PARAMETER

RANGE

UNITS

Input Voltage

Lead temperature (soldering 10 Sec)

300

°C

Input Output Differential

25

Output Voltage

+25

DC Output Current

1.5

A

ESD (MIL-STD-883, M3015, Class 3A)

>4000

V

Operating Junction Temperature Range

-55 to +150

°C

Storage Temperature Range

-65 to +150

°C

NOTICE: Stresses above those listed under "Absolute Maximums Rating" may cause permanent damage to the device. These are

stress rating only; functional operation beyond the "Operation Conditions" is not recommended and extended exposure

beyond the "Operation Conditions" may effect device reliability.

RECOMMENDED OPERATING CONDITIONS

PARAMETER

RANGE

UNITS

Output Voltage Range

1.275 to 23

Input Output Differential

3/

1.5 to 25

Case Operating Temperature Range

-55 to +125

°C

Thermal Resistance, Junction to case

5°C/W

ELECTRICAL PERFORMANCE CHARACTERISTICS

PARAMETER

SYM

CONDITIONS (P

MIN

MAX

UNITS

Reference Voltage 2/ 3/

1.210

1.275

V

-

0.25

%

-

0.3

%

Dropout Voltage 2/ 4/

-1.30

V

Adjust Pin Current 2/

-

-120

µA

Adjust Pin Current Change

2/

-

-

5

µA

Current Limit 2/ 6/

1.5

0.047

-

-

A

A

Minimum Load Current 5/

-

10

mA

Ripple Rejection 3/

-

60

-

dB

Thermal Regulation

-

-

0.04

%/W

5/

-

25°C

-0.3

%

Notes:

1/ For compliance with MIL-STD- 883 revision C current density specification, the RH1086MK is derated to 1 Amp but is capable of

1.5 Amps.

3/ Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the

input/output differential voltage and the output current. Guaranteed maximum power dissipation will not be available over the full

input/output voltage range.

4/ Dropout voltage is specified over the full output current range of the device.

5/ Not tested. Shall be guaranteed by design, characterization, or correlation to other tested parameters.

6/ Pulsed @ <10% duty cycle @ +25°C (See Note 1).