SIGNAL & CONTROL SOLUTIONS

Aeroflex Control Componen. reserves the right to make changes to any products and

services herein at any time without notice. Consult Aeroflex or an authorized sales

representative to verify that the information in this data sheet is current before using

this product. Aeroflex does not assume any responsibility or liability arising out of the

application or use of any product or service described herein, except as expressly

agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or

service from Aeroflex convey a license under any patent rights, copyrights, trademark

rights, or any other of the intellectual rights of Aeroflex or of third parties.

Copyright 2013 Aeroflex Signal & Control Solutions. All rights reserved.

www.aeroflex.com/Microwave www.aeroflex.com/ASCS

Aeroflex Signal & Control Solutions

Aeroflex Microelectronic Solutions

40 Industrial Way East

35 South Service Rd

Eatontown , NJ 07724 [USA]

Plainview, NY 11803 [USA}

Fax: (732) 460-0214

Fax: (516) 694-4823

Sales

Phone: (732) 460-0212

ASCS-sales@aeroflex.com

ISO 9001:2008 certified

Our passion for performance is defined by three

attributes represented by these three icons:

solution-minded, performance-driven and customer-focused.

Revision Date: 8/21/2012

AVAILABLE OPTIONS*:

1 Hz frequency resolution

(Limits switching speed to 1 microsecond for steps less than .500

MHz - Does not affect spectral purity or phase noise)

FM Chirp (Wideband FM)

FM Normalized

40 GHz Frequency Doubler, +10 dBm, SMA (F) Input, K (F) Output,

Rack Mount Unit

(Dimensions: 2.2” H x 19” W x 6” D, Weight: <2 lbs)

10 MHz Phase Lock Capability. Internal reference can be phase

locled to 10 MHz Signal at 0 dBm ±2 dB

(Provides External 10 MHz +2 dBm ±2 dB)

19 Inch Standard Equipment Rack Mounting Slides.

* Contact factory for additional special options

FREQUENCY MODULATION OPTION:

Sensitivity:

1.0 volt peak for full scale deviation

The amplitude of the FM input signal must be adjusted to obtain the

desired deviation according to the output frequency range.

Source:

External Only

Input Impedance:

50 Ohms

Modes:

DC and AC

Rate:

DC Mode:

DC to 5 MHz

AC Mode:

50 Hz to 5 MHz

Frequency Stability

AC Mode - The FM Oscillator is phase locked to the synthesizer

reference. Consequently, the carrier has the same

stability as in CW Mode.

DC Mode - The FM Oscillator Phase Lock is unlocked to introduce

the DC or very low frequency FM signal. The oscillator

is thus free running.

Linearity:

<10% for maximum deviation

FM Deviation:

Frequency

Range (MHz)

Deviation (MHz)

minimum

Rate

(MHz / ms)

300- 600

±8.0

22.0

600- 1200

±15.0

44.0

1200 -2400

±30.0

88.0

2400 - 4800

±60.0

175.0

4800 - 13500

±120.0

350.0

13500 -18000

±240.0

700.0

20000 - 26500

±240.0

700.0

FS5000 Series

Frequency Synthesizer