 2015 Microchip Technology Inc.

DS20005409A-page 5

MCP25612FD

2.0

ELECTRICAL

CHARACTERISTICS

2.1

Absolute Maximum Ratings†

DC Voltage at CANHx and CANLx............................................................................................................... -58V to +58V

Transient Voltage on CANHx, CANLx (ISO-7637) (see Figure 2-4)......................................................... -150V to +100V

Storage Temperature ..............................................................................................................................-55°C to +150°C

Operating Ambient Temperature.............................................................................................................-40°C to +150°C

Soldering Temperature of Leads (10 seconds) ..................................................................................................... +300°C

ESD Protection on CANHx and CANLx Pins (IEC 61000-4-2); 330Ω/150 pF; Unpowered; Contact Discharge...... ±6 kV

ESD Protection on CANHx and CANLx Pins (IEC 801; Human Body Model); 1500Ω/100 pF ................................ ±8 kV

ESD Protection on All Other Pins (IEC 801; Human Body Model); 1500Ω/100 pF.................................................. ±4 kV

ESD Protection on All Pins (IEC 801; Machine Model); 0Ω/200 pF........................................................................±300V

ESD Protection on All Pins (IEC 801; Charge Device Model).................................................................................±750V

2.2

Specifications

†NOTICE:

Stresses above those listed under “Maximum ratings” may cause permanent damage to the device. This

is a stress rating only and functional operation of the device at those or any other conditions above those indicated

in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended

periods may affect device reliability.

TABLE 2-1:

DC ELECTRICAL SPECIFICATIONS

Electrical Characteristics:

Characteristic

Sym

Min

Typ

Max

Units

Conditions

Voltage Range

4.5

—

5.5

Supply Current

(per transceiver)

—

5

10

—

45

70

Standby Current

(per transceiver)

—515

µA

High Level of the POR

Comparator

3.8

—

4.3

V

Low Level of the POR

Comparator

3.4

—

4.0

V

Hysteresis of the POR

Comparator

0.3

—

0.8

V

Note 1:

Characterized; not 100% tested.

2:

-12V to 12V is ensured by characterization, tested from -2V to 7V.