 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
Z80 数据表(PDF) 39 Page - Zilog, Inc. |
|
|
|||||||||||||||||||||||||||||
Z80 数据表(HTML) 39 Page - Zilog, Inc. |
|
|
39 / 330 page  < %27 2GTKRJGTCNU 7UGT /CPWCN UM008101-0601 Counter/Timer Channels where tc is the period of System clock, P is the prescaler factor of 16 or 256, and TC is the time constant data word. Bit 5 = 1. Defined for Timer mode only. Prescaler factor is 256. Bit 5 = 0. Defined for Timer mode only. Prescaler factor is 16. Bit 4 = 1. TIMER Mode: positive edge trigger starts timer operation. COUNTER Mode: positive edge decrements the down-counter. Bit 4 = 0. TIMER Mode: negative edge trigger starts timer operation. COUNTER Mode: negative edge decrements the down-counter. Bit 3 = 1. TIMER Mode only. External trigger is valid for starting timer operation after rising edge of T2 of the machine cycle following the one that loads the tune constant. The prescaler is decremented two clock cycles later if the setup tune is met, otherwise three clock cycles. Bit 3 = 0. TIMER Mode only. Timer begins operation on the rising edge of T2 of the machine cycle following the one that loads the time constant. Bit 2 = 1. The time constant data word for the Time Constant register is the next word written to this channel. If an updated channel control word and time constant data word are written to a channel while it, is already in operation, the down-counter continues decrementing to zero before the new time constant is loaded. Bit 2 = 0. No time constant date word for the Time Constant register is to follow. The channel control word updates the status of a channel already in operation to channel will not operate without a correctly programmed data word in the lime Constant register. Bit 2 in the channel control word must be set in order to write to the Time Constant register. Bit 1 = 1. Counting and/or timing operation is terminated and the channel is reset. This is not a stored condition. The bits in the Channel Control register are unchanged. If bits 1 and 2 are set to 1, the channel resumes operation upon loading a time constant. Bit 1 = 0. Channel continues current operation. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
