SP8062

Rev 1.7 (01-16-04): SP8062 – High Speed 10 Channel PDIC

SIPEX RESERVES THE RIGHT TO MAKE CHANGES TO THIS DATASHEET. CALL FOR UPDATES: 1-978-667-8700.

SIPEX CONFIDENTIAL, PRELIMINARY & PROPRIETARY. DO NOT DISTRIBUTE

OR COPY

page

ABSOLUTE MAXIMUM RATINGS

These are stress ratings only and functional operation of the device at these ratings or any other

above those indicated in the operation sections of the specifications below is not implied.

Exposure to absolute maximum rating conditions for extended periods of time may affect

reliability.

Supply Voltage (Vcc)……………………..6.0V

Input Voltage at any input….-0.6V to Vcc +0.5V

Output Voltage (Vout)…………..……… Vcc

Storage Temperature………...-40

°C to +100°C

Soldering Temperature…………………+235

°C

RECOMMENDED OPERATING CONDITIONS

Supply Voltage (Vcc)…………………...4.5V to 5.5V

Reference Voltage (Vs)…..…………….1.8V to 2.2V

Operating temperature………………….-30 to +80

BOARD LAYOUT AND GROUNDING

To obtain the best performance from the SP8062, a printed circuit board with ground plane is

required. High quality, low series resistance ceramic 0.1uF bypass capacitors should be used at

the Vcc and Vs pins (pins 1 and 16). These capacitors must be located as close to the pins as

possible. The traces connecting the pins and the bypassing capacitors must be kept short and

should be made as wide as possible.