| 数据搜索系统,热门电子元器件搜索 |
|
TPS22981RGPR 数据表(PDF) 13 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TPS22981RGPR 数据表(HTML) 13 Page - Texas Instruments |
|
13 / 27 page ![]() 1.00E-08 1.00E-07 1.00E-06 1.00E-05 1.00E-04 1.00E-03 1.00E-02 0 1 2 3 4 5 6 7 8 9 Short Resistance - TPS22981 www.ti.com SLVSBM6B – DECEMBER 2012 – REVISED NOVEMBER 2015 Figure 8. Overcurrent Response Time vs Short Resistance All short-circuit conditions are treated as overcurrent conditions. In the event of a short circuit, the device will limit the output current to the corresponding RSET value and continue to do so until thermal shutdown is encountered or the short-circuit condition is removed. 7.3.7 Reverse Current Protection Reverse current protection for the V3P3 supply to OUT triggers at IREV3P3 causing the V3P3 supply switch to open. When the HV_EN signal is not asserted and reverse current protection is triggered, a discharge current source is turned on to bring the output voltage to near the V3P3 voltage. 7.3.8 Reverse Current Blocking The VHV switch blocks reverse current flow from OUT to VHV when the switch is off. 7.3.9 Thermal Shutdown The device enters thermal shutdown when junction temperature reaches TSD. The device will resume previous state on power up once the junction temperature has dropped by 10°C. Connect thermal vias to the exposed GND pad underneath the device package for improved thermal diffusion. 7.4 Device Functional Modes 7.4.1 UVLO and Enable When ENHVU is low, the TPS22981 is enabled by the logical AND of the EN input, the V3P3 UVLO, and the Thermal Shutdown. When the V3P3 UVLO threshold has been crossed, the device is not in thermal shutdown, and the EN input is high, the device will enable. When the V3P3 UVLO triggers, regardless of the states of any digital logic controls, the device will open all switches. ENHVU adds the VHV UVLO to the logical decision enabling the device. When ENHVU is high, the TPS22981 is enabled by the logical AND of the EN input, the V3P3 UVLO, the VHV UVLO, and the thermal shutdown. When both UVLO thresholds have been crossed, the device is not in thermal shutdown, and the EN input is high, the device will enable. When either UVLO triggers, regardless of the states of any digital logic controls, the device will open all switches. Table 2 shows the pin and voltage configurations for enabling the device. NOTE A 1 for the UVLO columns means the device is in a UVLO condition. A PD indicates a pulldown resistance of ROUTDIS to GND. Copyright © 2012–2015, Texas Instruments Incorporated Submit Documentation Feedback 13 Product Folder Links: TPS22981 |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |