MICROWAVE CORPORATION

14 - 173

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order Online at www.hittite.com

14

Absolute Maximum Ratings

Note:

DC blocking capacitors are required at ports RFC

and RF1, 2, 3, 4, 5, 6, 7, 8. Their value will determine

the lowest transmission frequency.

HMC321LP4

GaAs MMIC SP8T NON-REFLECTIVE

POSITIVE CONTROL SWITCH, DC - 8.0 GHz

v02.0604

Outline Drawing

NOTES:

1. MATERIAL PACKAGE BODY: LOW STRESS INJECTION MOLDED

PLASTIC SILICA AND SILICON IMPREGNATED.

2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY

3. LEAD AND GROUND PADDLE PLATING: Sn/Pb SOLDER

4. DIMENSIONS ARE IN INCHES [MILLIMETERS].

5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE

6. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.

PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.

7. PACKAGE WARP SHALL NOT EXCEED 0.05mm.

8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED

TO PCB RF GROUND.

9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB

LAND PATTERN.

Bias Voltage Range (Port Vdd)

+7.0 Vdc

Control Voltage Range

(A, B, & C)

-0.5V to Vdd +1.0 Vdc

Storage Temperature

-65 to +150 °C

Operating Temperature

-40 to +85 °C

Maximum Input Power

Vdd = +5V

+26 dBm