MICROWAVE CORPORATION

14 - 223

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order Online at www.hittite.com

14

The circuit board used in the final application should be

generated with proper RF circuit design techniques. Signal

lines at the RF port should have 50 ohm impedance and

the package ground leads and package bottom should be

connected directly to the ground plane similar to that shown

above. The evaluation circuit board shown above is avail-

able from Hittite Microwave Corporation upon request.

List of Material

Item

Description

J1 - J3

PC Mount SMA RF Connector

J4 - J7

DC Pin

R1 - R2

100 Ohm Resistor, 0402 Pkg.

C1, C2, C4 - C7

3300 pF Capacitor, 0402 Pkg.

C3

4.7 uF Tantalum Capacitor

U1

HMC348LP3 SPDT Switch

PCB*

106255 Evaluation PCB

* Circuit Board Material: Rogers 4350

GaAs MMIC SPDT NON-REFLECTIVE

CATV SWITCH, DC - 2.5 GHz

v04.0604

HMC348LP3