MICROWAVE CORPORATION

14 - 245

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order Online at www.hittite.com

14

HMC427LP3

v05.0604

GaAs MMIC POSITIVE CONTROL

TRANSFER SWITCH, DC* - 8.0 GHz

Absolute Maximum Ratings

Outline Drawing

Bias Voltage Range (Vdd)

+7.0 Vdc

Control Voltage Range (A & B)

-0.5V to Vdd +1.0 Vdc

Channel Temperature

150 °C

Thermal Resistance

130 °C/W

Storage Temperature

-65 to +150 °C

Operating Temperature

-40 to +85 °C

Maximum Input Power

+27 dBm

Note:

DC blocking capacitors are required at ports RF1, 2, 3,

& 4. Their value will determine the lowest transmission

frequency.

NOTES:

1. MATERIAL PACKAGE BODY: LOW STRESS INJECTION MOLDED

PLASTIC SILICA AND SILICON IMPREGNATED.

2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY

3. LEAD AND GROUND PADDLE PLATING: Sn/Pb SOLDER

4. DIMENSIONS ARE IN INCHES [MILLIMETERS].

5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE

6. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.

PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.

7. PACKAGE WARP SHALL NOT EXCEED 0.05mm.

8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED

TO PCB RF GROUND.

9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB

LAND PATTERN.