MICROWAVE CORPORATION

9 - 107

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order Online at www.hittite.com

9

Absolute Maximum Ratings

Outline Drawing

Control Voltage (V1 to V3)

-0.5 Vdc to Vdd +1 Vdc

Bias Voltage (Vdd)

+7.0 Vdc

Staorage Temperature

-65 to +150 °C

Operating Temperature

-40 to +85 °C

RF Input Power

+30 dBm

NOTES:

1. MATERIAL PACKAGE BODY: LOW STRESS INJECTION MOLDED

PLASTIC SILICA AND SILICON IMPREGNATED.

2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY

3. LEAD AND GROUND PADDLE PLATING: Sn/Pb SOLDER

4. DIMENSIONS ARE IN INCHES [MILLIMETERS].

5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE

6. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.

PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.

7. PACKAGE WARP SHALL NOT EXCEED 0.05mm.

8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED

TO PCB RF GROUND.

HMC468LP3

v00.0403

1 dB LSB GaAs MMIC 3-BIT DIGITAL

POSITIVE CONTROL ATTENUATOR, DC - 6.0 GHz