GaAs SP3T 2.6 V CDMA-GPS Switch

DC - 2.5 GHz

Rev. V1

MASWSS0199

3

33

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

V1

V2

V3

ANT–

GPS

ANT -

PCS

ANT -

CELL

1

0

0

On

Off

Off

0

1

0

Off

On

Off

0

0

1

Off

Off

On

8. For positive voltage control, external DC blocking capacitors

are required on all RF ports.

9. Differential voltage, V(state 1) - V(state 0), must be +2.6 V

minimum, but must not exceed +8.5 V.

10. 0 = -5 V to +2.4 V, 1 = -2.4 V to +5 V.

Parameter

Absolute Maximum

Input Power

(0.5 - 2.5 GHz, 2.6 V Control)

+35 dBm

Operating Voltage

+8.5 volts

Operating Temperature

-40°C to +85°C

Storage Temperature

-65°C to +150°C

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

6. Exceeding any one or combination of these limits may cause

permanent damage to this device.

7. M/A-COM Technology Solutions does not recommend

sustained operation near these survivability limits.

†

Reference Application Note S2083 for lead-free solder reflow recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.

Plating is 100% matte tin over copper.