Push Pull CATV Amplifier

50 - 1000 MHz

Rev. V1

MAAMSS0044

2

2

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

2

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Gain

—

dB

11

12.5

13.5

Gain Flatness

—

dB

—

0.8

1.3

Noise Figure

—

dB

—

3.7

5

Input Return Loss

—

dB

—

15

—

Output Return Loss

—

dB

—

15

—

Output IP2

400 MHz, +4 dBm output

dBm

—

75

—

Output IP3

Two tones at 397 & 403 MHz, +8 dBm output/tone

dBm

—

42

—

Composite Triple Beat, CTB

79 Channels, +34 dBmV / Channel at the output

77 Channels, +39 dBmV / Channel at the output

dBc

dBc

—

—

-75

-65

-70

—

Composite Second Order, CSO

79 Channels, +34 dBmV / Channel at the output

77 Channels, +39 dBmV / Channel at the output

dBc

dBc

—

—

-85

-75

-80

—

Cross modulation

79 Channels, +34 dBmV / Channel at the output

77 Channels, +39 dBmV / Channel at the output

dBc

dBc

—

—

-75

-65

—

—

P1dB

400 MHz

dBm

—

24

—

+5 Volts

mA

—

225

280

Circuit with M/A-COM Balun MABACT0069

Parameter

Absolute Maximum

Input Power

+20 dBm

Operating Voltage

+10 volts

Operating Temperature

-40°C to +85°C

150°C

Storage Temperature

-65°C to +150°C

5. Exceeding any one or combination of these limits may cause

permanent damage to this device.

6. M/A-COM does not recommend sustained operation near

these survivability limits.

Typical thermal resistance (Өjc) = 39° C/W.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.