PI49FCT3807ASE datasheet(2/7 Pages) PERICOM

2 / 7 page

PI49FCT3807

3.3V Fast CMOS Clock Driver

PS7010D

09/08/04

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the

device. This is a stress rating only and functional operation

of the device at these or any other conditions above those

indicated in the operational sections of this specification is

not implied. Exposure to absolute maximum rating condi-

tions for extended periods may affect reliability.

DC Electrical Characteristics (TA= –40°C to +85°C VCC = 3.3V ±0.3V)

Symbol

Parameters

Test Conditions(1)

Min.

Typ.

Max.

Units

VOH

Output High Voltage

VCC = Min.,

VIN = VIL or VIH

IOH = -0.1mA

IOH = -8mA

VCC -0.2

2.4(3)

3.0

VOL

Output Low Voltage

VCC = Min.,

VIN = VIL or VIH

IOH = 0.1mA

IOH = 16mA

IOH = 24mA

0.2

0.3

0.2

0.4

0.5

VIH

Input High Voltage

Guaranteed Logic HIGH Level (Input Pins)

2.0

5.5

VIL

Input Low Voltage

Guaranteed Logic LOW Level (Input Pins)

-0.5

0.8

IIH

Input High Current

VCC = Max.

VIN = VCC

µA

IIL

Input Low Current

VCC = Max.

VIN = GND

-1

VIK

Clamp Diode Voltage

VCC = Min., IIN = -18mA

-0.7

-1.2

IODH

Output High Current(4, 5)

VOUT = 1.5V, VIN = VIL or VIH, VCC = 3.3V

-35

-60

-110

IODL

Output Low Current(4, 5)

VOUT = 1.5V, VIN = VIL or VIH, VCC = 3.3V

200

IOS

Short Circuit Current(4, 5)

VCC = Max., VOUT = GND

-60

-135

-240

Input Hysteresis

150

Storage Temperature ............................................................–65°C to +150°C

Ambient Temperature with Power Applied ...........................–40°C to +85°C

Supply Voltage to Ground Potential (Inputs & VCC Only).....–0.5V to +7.0V

Supply Voltage to Ground Potential (Outputs & D/O Only) ..–0.5V to +7.0V

DC Input Voltage ....................................................................–0.5V to +7.0V

DC Output Current............................................................................... 120mA

Power Dissipation ................................................................................... 0.5W

Notes:

For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

Typical values are at VCC = 3.3V, +25°C ambient and maximum loading.

VOH = VCC – 0.6V at rated current.

This parameter is determined by device characterization but is not production tested.

Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

PI49FCT3807ASE 数据表(PDF) 2 Page - Pericom Semiconductor Corporation

PI49FCT3807ASE 数据表(HTML) 2 Page - Pericom Semiconductor Corporation

Html Pages

1 2 3 4 5 6 7

数据表下载