test perFOrmed

125°C standard

125°C /es

/883

Class h Qml

Pre-cap Inspection

Method 2017, 2032

yes

yes

yes

Temperature Cycle (10 times)

Method 1010, Cond. C, -65°C to 150°C, ambient

Method 1010, Cond. B, -55°C to 125°C, ambient

no

no

no

yes

yes

no

Constant Acceleration

Method 2001, 3000 g

Method 2001, 500 g

no

no

no

yes

yes

no

Method 1015, 125°C case, typical

96 hours

160 hours

no

no

yes

no

no

yes

Final Electrical Test MIL-PRF-38534, Group A

Subgroups 1 through 6: -55°C, +25°C, +125°C case

Subgroups 1 and 4: +25°C case

no

yes

no

yes

yes

no

Hermeticity Test

Fine Leak, Method 1014, Cond. A

Gross Leak, Method 1014, Cond. C

no

no

yes

yes

yes

no

yes

yes

no

Final visual inspection

Method 2009

yes

yes

yes

Test methods are referenced to MIL-STD-883 as determined by MIL-PRF-38534.

Notes:

1. Standard and /ES, non-QML products, do not meet all of the requirements of MIL-PRF-38534.

2. Burn-in temperature designed to bring the case temperature to +125°C

Crane Aerospace & Electronics Power Solutions

FME28-461 EMI Input Filters FME28 Rev C - 20100226. This revision supersedes all previous releases. All technical information is believed to be accu-

rate, but no responsibility is assumed for errors or omissions. Interpoint reserves the right to make changes in products or specifications without notice.

FME Series EMI Filters are a trademark of Interpoint. Copyright © 1999 - 2010 Interpoint Corporation. All rights reserved. www.interpoint.com

Page 13 of 13

FMe28-461 eMi input Filters

28 Volt input – 15 aMp