Table is for reference only. See individual Series' datasheets for specific screening.

nOn

/eS

/883

Pre-capInspection,Method2017,2032

n

n

n

temperatureCycle(10times)

Method 1010, Cond. C, -65°C to +150°C, ambient

n

Method 1010, Cond. B, -55°C to +125°C, ambient

n

ConstantAcceleration

Method 2001, 3000 g

n

Method 2001, 500 g

n

PInd,testMethod2020,Cond.A

96 hours

n

160 hours

n

Finalelectricaltest,MIL-PRF-38534,groupA,

Subgroups 1 through 6, -55°C, +25°C, +125°C case

n

Subgroups 1 and 4, +25°C case

n

n

Hermeticitytest

n

n

n

n

Gross Leak, Dip

n

Finalvisualinspection,Method2009

n

n

n

Test methods are referenced to MIL-STD-883 as determined by MIL-PRF-38534.

Notes

1. Standard and ES are non-QML products and may not meet all of the requirements of MIL-PRF-38534.

2. All processes are QML qualified and performed by certified operators.

3. Not required by DLA but performed to assure product quality.

4. Burn-in temperature designed to bring the case temperature to +125°C minimum.

Burn-in is a powered test.

Crane Aerospace & Electronics Power Solutions

MFKsingleanddualdC-dCConverters

MFK Single and Dual, MFK Rev AJ - 2016.04.25. This revision supersedes all previous releases. All technical information is believed to be

accurate, but no responsibility is assumed for errors or omissions. Crane Electronics, Inc reserves the right to make changes in products or

specifications without notice. Interpoint is a registered trademark of Crane Co. MFK Series is a trademark of Crane Electronics, Inc. Copyright ©

1999 - 2016 Crane Electronics, Inc. All rights reserved. www.craneae.com/interpoint

Page 23 of 23

16tO50vOLtsInPUt–25WAtt