SN74LVC2G32DCUT datasheet(2/12 Pages) TI

2 / 12 page

SN74LVC2G32

DUAL 2INPUT POSITIVEOR GATE

SCES201J − APRIL 1999 − REVISED SEPTEMBER 2003

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

description/ordering information (continued)

NanoStar

 and NanoFree package technology is a major breakthrough in IC packaging concepts, using the

die as the package.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,

preventing damaging current backflow through the device when it is powered down.

FUNCTION TABLE

(each gate)

INPUTS

OUTPUT

logic diagram (positive logic)

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†

Supply voltage range, VCC

−0.5 V to 6.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, VI (see Note 1)

−0.5 V to 6.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voltage range applied to any output in the high-impedance or power-off state, VO

(see Note 1)

−0.5 V to 6.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voltage range applied to any output in the high or low state, VO

(see Notes 1 and 2)

−0.5 V to VCC + 0.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input clamp current, IIK (VI < 0)

−50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output clamp current, IOK (VO < 0)

−50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous output current, IO

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous current through VCC or GND

±100 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

θJA (see Note 3): DCT package

220

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DCU package

227

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

YEA/YZA package

140

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . .

YEP/YZP package

102

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.

2. The value of VCC is provided in the recommended operating conditions table.

3. The package thermal impedance is calculated in accordance with JESD 51-7.

SN74LVC2G32DCUT 数据表(PDF) 2 Page - Texas Instruments

SN74LVC2G32DCUT 数据表(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

数据表下载

链接网址

SN74LVC2G32DCUT 数据表(PDF) 2 Page - Texas Instruments

SN74LVC2G32DCUT 数据表(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

数据表 下载

链接网址

数据表下载