Product Specification

Revision: D

Date: February 29, 2016

© Samtec, Inc.

Page 2

1.0 SCOPE

1.1 This specification covers performance, testing and quality requirements for Samtec QFS/QMS Series 0,635 mm

(.025”) Q2™ High Speed Rugged Ground Plane Socket / Terminal Strip connector system. All information

contained in this specification is for a 10 mm mated height vertical configuration unless otherwise noted.

2.0 DETAILED INFORMATION

2.1 Product prints, footprints, catalog pages, test reports and other specific, detailed information can be found at

www.samtec.com?QFS and www.samtec.com?QMS.

3.0 TESTING

3.1 Current Rating: 1.5 A (6 Adjacent Pins Powered)

3.1.1

Current Carrying Capacity: tested per EIA-364-70

3.1.2

Current Cycling: tested per EIA-364-55

3.2 Voltage Rating: 300 VAC

3.3 Operating Temperature Range: -55°C to +125°C

3.4 Electrical:

ITEM

TEST CONDITION

REQUIREMENT

STATUS

Withstanding Voltage

EIA-364-20 (No Flashover,

Sparkover, or Breakdown)

900 VAC

Pass

Insulation Resistance

EIA-364-21 (1000 MΩ

minimum)

1,000 MΩ

Pass

Contact Resistance

(LLCR)

EIA-364-23

Δ 15 mΩ maximum

(Samtec defined)/ No damage

Pass

3.5 Mechanical:

ITEM

TEST CONDITION

REQUIREMENT

STATUS

Durability

EIA-364-09C

500 cycles (30µ" Au)

Pass

Random Vibration

EIA-364-28 Condition V, Letter B

7.56 G 'RMS', 50 to 2000 Hz, 2

hours per axis, 3 axis total , PSD

0.04

Visual Inspection: No Damage

LLCR: Δ 15 mΩ maximum

Event Detection: No interruption >

1 microsecond

Pass

Mechanical Shock

EIA-364-27 100 G, 6

milliseconds, sawtooth wave,

11.3 fps, 3 shocks/direction, 3

axis (18 total shocks)

Visual Inspection: No Damage

LLCR: Δ 15 mΩ maximum

Event Detection: No interruption >

1 microsecond

Pass

Normal Force

EIA-364-04

30 grams minimum for gold

interface

Pass