Product Specification

Revision: E

Date: November 11, 2015

© 2012 Samtec, Inc.

Page 2

1.0 SCOPE

1.1 This specification covers performance, testing and quality requirements for Samtec QSS/QTS Series 0,635 mm

High Speed Socket/Terminal Strips. These socket and terminal strips are available in vertical, edge mount and right

angle configurations for parallel, perpendicular and co-planar board-to-board applications. All information

contained in this specification is for a 5,00 mm mated height vertical configuration unless otherwise noted.

2.0 DETAILED INFORMATION

2.1 Product prints, footprints, catalog pages, test reports and other specific, detailed information can be found at

www.samtec.com?QSS and www.samtec.com?QTS.

3.0 TESTING

3.1 Current Rating: 1.3A

3.2 Voltage Rating: 275 VAC

3.3 Operating Temperature Range: -55°C to +125°C

3.4 Electrical:

ITEM

TEST CONDITION

REQUIREMENT

STATUS

Withstanding Voltage

EIA-364-20 (No Flashover,

Sparkover, or Breakdown)

825 VAC

Pass

Insulation Resistance

EIA-364-21 (5000 MΩ

minimum)

15,000 MΩ

Pass

Contact Resistance

(LLCR)

EIA-364-23

Δ 15 mΩ maximum

(Samtec defined)/ No damage

Pass

3.5 Mechanical:

ITEM

TEST CONDITION

REQUIREMENT

STATUS

Durability

EIA-364-09C

100 cycles (w/Env.) 1000 cycles

(w/o Env)

Pass

Random Vibration

EIA-364-28 Condition V, Letter B

7.56 G 'RMS', 50 to 2000 Hz, 2

hours per axis, 3 axis total , PSD

0.04

Visual Inspection: No Damage

LLCR: Δ 15 mΩ maximum

Event Detection: No interruption >

1.0 microsecond

Pass

Mechanical Shock

EIA-364-27 100 G, 6

milliseconds, sawtooth wave,

11.3 fps, 3 shocks/direction, 3

axis (18 total shocks)

Visual Inspection: No Damage

LLCR: Δ 15 mΩ maximum

Event Detection: No interruption >

1.0 microsecond

Pass

Normal Force

EIA-364-04

30 grams minimum for gold

interface

Pass