If Military/Aerospace specified devices are required,

please contact the National Semiconductor Sales Office/

Distributors for availability and specifications.

Storage Temperature Range

Ceramic DIP

−65˚C to +175˚C

Molded DIP and SO-14

−65˚C to +150˚C

Lead Temperature

Ceramic DIP (Soldering, 60 sec.)

300˚C

Molded DIP and SO-14

(Soldering, 10 sec.)

265˚C

Maximum Power Dissipation (Note 1) at 25˚C

Molded Package

1040 mW

SO Package

930 mW

Suppy Voltage

Input Voltage (Any Input)

5.5V

Output Voltage (Any Output)

−5.0V to +12V

Recommended Operating Conditions

DS75110A

Units

Min

Typ

Max

Positive Supply Voltage (V

4.75

5.0

5.25

V

Negative Supply Voltage (V

−4.75

−5.0

−5.25

V

Positive Common Mode Voltage (V

0

10

V

Negative Common Mode Voltage (V

0

−3.0

V

Operating Temperature (T

0

25

70

˚C

Note 1: Derate molded DIP package 8.3 mW/˚C above 25˚C, derate SO package 7.5 mW/˚C above 25˚C.

Over recommended operating temperature range, unless otherwise specified.

Symbol

Parameter

Conditions

Min

Typ

Max

Units

V

IH

Input Voltage HIGH

2.0

V

V

IL

Input Voltage LOW

0.8

V

V

IC

Input Clamp Voltage

V

−0.9

−1.5

V

I

O(On)

On-State

V

12

15

mA

Output Current

V

6.5

12

I

O(Off)

Off-State Output Current

V

100

µA

(Inhibited Only)

I

I

Input Current

A, B or C

V

1.0

At Maximum

Inputs

mA

Input Voltage

D Input

2.0

I

IH

Input Current HIGH

A, B or C

V

40

Input

µA

D Input

80

I

IL

Input Current LOW

A, B or C

V

−3.0

Input

mA

D Input

−6.0

I+

(On)

Positive Supply Current

V

23

35

mA

with Driver Enabled

A & B Inputs at 0.4V,

I−

(On)

Negative Supply Current

C & D Inputs at 2.0V

−34

−50

mA

with Driver Enabled

I+

(Off)

Positive Supply Current

V

21

mA

with Driver Inhibited

A, B,C&D Inputs

I−

(Off)

Negative Supply Current

at 0.4V

−17

mA

with Driver Inhibited

Note 2: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices

should be operated at these limits. The tables of “Electrical Characteristics” provide conditions for actual device operation.

Note 4: When using only one channel of the line drivers, the other channel should be inhibited and/or its outputs grounded.

www.national.com

2