TechnicalData1032

Effective May 2016

For Eaton’s Bussmann series

product information,

call 1-855-287-7626 or visit:

Eaton.com/bussmannseries

Eaton and Bussmann are valuable

trademarks of Eaton in the US and other

countries. You are not permitted to use the

Eaton trademarks without prior written

consent of Eaton.

CSA is a registered trademark of the

Canadian Standards Group.

UL is a registered trademark of the

Underwriters Laboratories, Inc.

Eaton

1000 Eaton Boulevard

Cleveland, OH 44122

United States

Eaton.com

Bussmann Division

114 Old State Road

Ellisville, MO 63021

United States

Eaton.com/bussmannseries

© 2016 Eaton

All Rights Reserved

Printed in USA

Publication No. 1032 – SB02374

May 2016

Follow us on social media to get the

latest product and support information.

Plug fuses

Dual-Element, time-delay

125 Volt, 1–30 amp

The only controlled copy of this Data Sheet is the electronic read-only version located on the Eaton Network Drive. All other copies of this

document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical

information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction

of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice,

any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible

applications.

Features:

•

Heavy duty, dual-element, time-delay rejection base fuse

•

Use to protect critical motor circuits or motors that cycle on/

off frequently

•

Features non-interchangeable body

•

An industrial/commerical grade product with dual-element

construction

•

These fuses thread into SA adaptors

•

Industrial strength, featuring exclusive dual-element

construction

•

This spring loaded design provides superior short circuit and

overload protection

•

More time-delay than the medium duty Type SL fuses in order

to better protect industrial motors and critical residential

circuits

100

10

1

0.1

0.01

Amp

rating

Current in amps

Time-current curve – average

melt

Rejection base plug fuses

dual-element, time-delay 125 volt, up to 30 amp