HEX & HEY

Double-Pole for Class CC and ⁄‹Ω£™∑ ≈ 1⁄Ω™∑ Fuses

Series

Form No. HEX & HEY Series

Page 2 of 2

Data Sheet: 2126

The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is

intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change

design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con-

tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

Catalog and Specification Data

Breakaway Receptacles

Conductor Data

Catalog

Size

Symbol

Terminal Type

*Double

Pole

Copper Crimp

#12 to #8

1

•

•

-DRLC-A

#6

1

•

•

-DRLC-B

Copper Set-Screw

#12 to #3

1

•

•

-DRLC-J

#12 to #3

2

•

•

-DRYC

*Terminal illustration shows the end views of single-pole

receptacle and one pole only of the double pole recepta-

cles. Thus, for example, in the case of a double-pole,

set-screw type receptacle with terminals that accept two conductors, a total

of four conductors could be connected to the receptacle.

Breakaway Holders

HEX Series Catalog Symbol: HEX-AW,

HEX-AW-DRLC-A, HEX-AW-DRYC, and HEX-JW-DRYC.

HEY Series Catalog Symbol: HEY-AW-DRLC-A,

HEY-AW-DRYC, and HEY-AW-DRLC-B.

In-Line Fuseholders, Double Pole

Example:

A double-pole, in-line, breakaway holder for ⁄‹Ω£™∑ ≈ 1⁄Ω™∑

fuses, a single #12 solid copper wire, copper crimp, on the

load side. A single #10 stranded copper wire, copper crimp

on the line side. Insulating boots are required.

1. Choose HEY- Series.

2. Choose “A” from 1st page for load side.

3. Choose “W” for breakaway requirement.

4. Choose “DRLC-A” for two-pole breakaway receptacle on

line side.

Complete Catalog Number: HEY-AW-DRLC-A

Insulating boots come with this catalog number.

Recommended Torque on Coupling Nut: 10-20 in-lb.

Ordering Information:

Load

Line

Terminal

Terminal

W

HEX

HEY

7-16-03

N03082