WIRELESS INTERFACE

AT&T LTE with fallback to HSPA+

Generic LTE with fallback to HSPA+

Verizon LTE with fallback to EVDO

Verizon DMNR/NEMO compliance

PROGRAMMABLE PLATFORM

Configurable Events: Up to 99 events can be triggered by I/O,

Modbus registers, or over 200 system variable which in turn

can send text messages or control I/O

Software Development Kit (SDK)

C/C++/Perl

PROTOCOL GATEWAY

I/O controller

Modbus RTU/TCP/ASCII

DNP3 Slave

SYSTEM PERFORMANCE

32-bit ARM9 400 MHz CPU

512 MB NAND Memory

128 MB RAM

TUNNELING

IPsec, GRE, OpenVPN

IP

NAT, port forwarding, dynamic DNS, DHCP

Stateful inspection firewall, IP transparency

ROUTING PROTOCOLS

OSPF, BGP, RIP

CLUSTERING

VRRP

GPS

GNSS Supported: GPS L1, GLONASS L1, Galileo E1

high RF sensitivity plus jamming detection/removal

CONNECTORS

Ethernet: Two (2) 10/100Base-T RJ-45 ports

WAN capability on ETH0

Serial: One (1) RS-232 (DB9) 115200bps

One (1) RS-485 (screw block)115200bps

USB: One (1) USB 2.0 (mini)

Antennas: Three (3) SMA connectors (antenna, diversity, GPS)

One (1) RP-SMA connector (Wi-Fi optional)

RAM 9000 LTE Multi-Carrier Specifications

INPUTS & OUTPUTS*

2 Digital Inputs

2 Digital Outputs

3 Analog Inputs

1 Form C Relay

WI-FI INTERFACE (OPTIONAL)

Complies with IEEE802.11b/g/n

Wireless Operation: Access Point

Maximum output power up to 25dBm

Supports up to 150Mbps with 40MHz channel

POWER INPUT

Range: 8-30 VDC (12 or 24 VDC nominal)

Power Consumption: (less DO power)

Standby: 4W (all models)

Transmitting:

·9X11: 5.0W – 9.4W (cellular only)

·9X31: 5.0W – 13.6W (cellular and Wi-Fi)

Power Consumption of DO: (max. each)

30 W (1A at 30 VDC)

Heat Dissipation: 46 BTU/hour max

MECHANICAL

Dimensions: 132H x 127D x 70W mm (5.2” x 5.00” x 2.75”)

Material: Steel with black zinc coating

Weight: 906 g (2 lbs)

ENVIRONMENTAL

Operating Temperature: -40° to +75°C*

Shock: IEC60068-2-27

Vibration: IEC60068-2-6

Humidity: 5 to 95% non-condensing

Ingress: IP30 protection

CERTIFICATION

EMI/EMC:

Emissions: FCC, Part 15 and Industry Canada, ICES-003; Class A;

EN55022, IEC61000-6-4

Immunity: IEC61000-6-2 (EN61000-4-2,3,4,5,6,8)

Hazardous Locations: Class I, Div. 2, Groups A, B, C, D, ISA 12.12.01

ATEX – EN60079-0, -15 (Zone 2, Category 3) CE

Electrical Safety: UL508/CSA22.2/14 (CUL); IEC61010-1

Carrier Specific Approvals (Contact Red Lion for latest)

RoHS compliant

WARRANTY

3 years on design and manufacturing defects

* See Hardware Manual for thermal considerations.

DIMENSIONS In inches (cm)