2

AM6544C

Analog Power

PRELIMINARY

Publication Order Number:

DS-AM6544_A

Notes

a.

Pulse test: PW <= 300us duty cycle <= 2%.

b.

Guaranteed by design, not subject to production testing.

Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation

or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or

use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental

damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and

actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by

customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed,

intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or

sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur.

Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its

officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney

fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer.

Ch Min

TypMax

N

1.0

P

-1.0

V

N±100

P±100

V

N1

P-1

V

N20

V

P-20

32

46

52

80

V

N

11

V

P

11

N4.7

P8.0

N1.8

P2.3

N1.5

P4.5

N13

P14

N14

P14

N30

P40

N30

P30

S

nC

Gate-Drain Charge

Dynamic

Limits

Unit

nA

Static

Test Conditions

V

Symbol

Parameter

Gate-Threshold Voltage

A

Gate-Body Leakage

uA

Zero Gate Voltage Drain Current

mΩ

Total Gate Charge

Gate-Source Charge

N-Channel

V

P-Channel

N

P

Turn-On Delay Time

Rise Time

nS

N-Chaneel

V

,

R

P-Channel

Fall-Time

Turn-Off Delay Time