°C and nominal power supply unless otherwise noted)

Analog

• Four channel analog input.

• Maximum CMV, input to output at 60Hz: 500V rms.

• Leakage I, input to output at 115Vrms, 60Hz: <2

µA rms.

• 15 bit measurement resolution.

• 8 conversions per second.

• Common mode rejection: 100dB at 50/60Hz.

• Autozero & autocalibration—no adjustment pots.

Digital

• 8-bit CMOS microcomputer.

• Digital scaling, linearization and calibration.

• Nonvolatile memory eliminates pots and switches.

• Small and large signal digital filtering with user selectable

time constants.

Communications

• Communications in ASCII via RS-232C, RS-485 ports.

• Selectable baud rates: 300, 600, 1200, 2400, 4800,

9600, 19200, 38400, 57600, 115200.

• NRZ asynchronous data format; 1 start bit, 7 data bits,

1 parity bit and 1 stop bit.

• Parity: odd, even, none.

• User selectable channel address.

• Modbus RTU or DGH ASCII communications protocol.

• Up to 247 multidrop modules per host serial port.

• Communications distance up to 4,000 feet (RS-485).

• Transient suppression on RS-485 communications lines.

• Communications error checking via checksum.

• All communications setups stored in EEPROM.

Power

Requirements: Unregulated +10V to +30Vdc, 0.75W max

Protected against power supply reversals.

Environmental

Temperature Range: Operating -25

°C to +70°C.

Storage -25

°C to +85°C.

Relative Humidity: 0 to 95% noncondensing.

Warranty

12 months on workmanship and material.

D5100M Voltage Inputs

• Voltages:

±100mV, ±1V, ±5V, ±10V, ±100Vdc.

• Resolution: 0.01% of FS (4 digits).

• Accuracy:

±0.02% of FS max.

• Zero drift:

±1 count max (autozero).

• Span tempco:

±50ppm/°C max.

• Input burnout protection to 250Vac .

• Input impedance:

≤ ±1V input =100MΩ min.

≥ ±5V input =1MΩ min.

D5200M Current Input

• Current: 4-20mAdc.

• Resolution: 0.04% of FS.

• Accuracy: 0.04% of FS.

• Zero drift:

±1 count max (autozero).

• Span tempco:

±50ppm/°C max.

• Voltage drop: 1.0V max.

D5300M Thermocouple Inputs

• Thermocouple types: J, K, T, E (factory set).

• Ranges: J = -200

°C to +760°C

T = -200

°C to +400°C

K = -150

°C to +1250°C E = -100°C to +1000°C

• Resolution:

±1°.

• Overall Accuracy (error from all sources) from 0 to +40

°C

ambient:

±1.0 °C .

• Input impedance: 100M

Ω min.

• Lead resistance effect: <20

µV per 350Ω.

• Open thermocouple and overrange indication.

• Input burnout protection to 250Vac.

• Automatic cold junction compensation and linearization.

D5450M Thermistor Inputs

• Thermistor types: 2252

Ω at 25°C.

• Range: -0

°C to +100°C.

• Resolution: 0.01

°C or F.

• Accuracy:

±0.1°C.

• Input protection to 30Vdc .

Specifications are subject to change without notice.

D5000M Mechanicals and Dimensions

Case: ABS with captive hardware.

Connectors: Screw terminal barrier plug (supplied).

Replace with Phoenix MSTB 1.5/10 ST 5.08 or equivalent.

NOTE: Spacing for mounting screws = 2.700" (6.858 cm).

Screw threads are 6 X 32.