PARAMETER

VALUE

INPUT VOLTAGE

+11.5 to +16V

INPUT CURRENT

<100mA, NO LOAD

<250mA, FULL LOAD

INPUT CAPACITANCE

440uF LOW ESR

PROGRAMMING VOLTAGE

0 to +5V, <100uA

RESPONSE TIME

<250msec (FULL LOAD, FULL-SCALE RESPONSE)

+/-1%

5 to 10%

<1% (15% to 100% Vout)

STABILITY

<0.01% / HOUR

TEMPCO

THERMAL SHOCK LIMIT

1°C / 10 SECONDS

OPERATING TEMPERATURE

STORAGE TEMPERATURE

-20 to +90°C

4711CR

WWW.XPPOWER.COM

PAGE 3

The C Series is a line of miniature, regulated high voltage power sup-

plies. Each model is programmed from 0 to 100% of rated output via a 0

to +5 volt, DAC-compatible, high-impedance programming input voltage.

Temperature drift is typically less than 50ppm/°C. These modules exhibit

very low ripple, noise, and EMI/RFI by utilizing a quasi-sinewave oscillator,

shielded transformer, excellent filtering techniques and an isolated steel

enclosure featuring a separate grounding pin. An externally accessible

potentiometer provides adjustable gain trim, allowing for individual calibration

of units. A proprietary encapsulation process and a custom 94V-0 listed,

high-performance formula are used to achieve excellent high voltage and

thermal properties. Positive and negative outputs are standard.

Also available with the C Series are the CM Series adapter kits. For more

details, refer to pages 10 and 11.

DETAILED PRODUCT DESCRIPTION

C SERIES