REMOTE 2 IN

DIGITAL LINK/LAN

Power cord length

Cabinet materials

Dimensions (W ×H × D):

Operating temperature

Operating humidity

Remote control unit

Power supply

Dimensions (W × H × D)

Weight

Supplied accessories

D-sub 9-pin ×1 for external control (parallel)

RJ-45 Network connection / digital link connection (video/network/serial

control) compliant with PJLink,100base-tx, Art-Net compatible

3.0 m (9

10 in)

Molded plastic

44 kg (97.0 lbs) (without lens)

43 dB

Normal

The operating temperature range is 0°C to 50°C (32 °F to 122 °F).

(Brightness is limited at operating temperatures of 35°C (95°F) or more

at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level,

and at operating temperatures of 25°C (77°F) or more at altitudes from

2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.)

Eco/Long life 1/2/3

The operating temperature range is 0°C to 45°C (32 °F to 113 °F).

(Brightness is limited at operating temperatures of 35°C (95°F) or more

at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot

be used at altitudes of 2,700 m (8,858 ft) or more above sea level.)

When the projector is used with a Smoke Cut Filter

The operating temperature range is 0°C to 40°C (32 °F to 104 °F).

(The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more

above sea level.)

* The brightness of the light source may drop depending on the operating

temperature range. The higher the temperture, the greater the drop in the

brightness of the light source will be.

10%– 80% (no condensation)

3 V DC (AA/R6 type battery ×2)

Approx. 30 m (98

5 in) when operated from directly in front of the

signal receptor

47.5 × 181.5 × 27.5 mm (1-7/8 × 7-5/32 × 1-3/32 inches)

Approx. 150 g (5.3 oz) (including batteries)

Power cord (×1) (x2 for PT-RZ12KE)

Wireless/wired remote control unit (× 1)

Batteries for remote control (AA/R6 type ×2)

Softwar

Lens drop-prevention screw (× 1)

e CD-ROM (Logo Transfer Software, Multi Monitoring

& Control Software) (× 1)

*4 With legs at shortest position.

*5Average value (excluding the optional lens). May differ depending on models.

*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.

*3 Up to a total of ±55° during simultaneous horizontal and vertical correction.

*6 Operation range differs depending on environments.

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.

*1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output termi-

nal cannot be used. Also, only certain commands can be received for external control using the serial terminal.

SERIAL IN

SERIAL OUT

REMOTE 1 IN

REMOTE 1 OUT

D-sub 9-pin (female) ×1 for external control (RS-232C compliant)

D-sub 9-pin (male) ×1 for link control

M3 jack ×1 for wired remote control

M3 jack ×1 for link control

3D SYNC 1 IN/OUT

3D SYNC 2 OUT

BNC × 1, 1.0 Vp-p, 75 ohms

Input: TTL, high impedance. Output: TTL, max. 10 mA

BNC × 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA

PT-

RZ12K

3-Chip DLP™ Projector

As of September 2015

4/14

SFD15M030