4725V01

PAGE 1

WWW.XPPOWER.COM

PRODUCT DESCRIPTION

Complete List of Models on pages 2 and 3

MODEL

OUTPUT

(POSITIVE OR NEGATIVE)

OUTPUT

OUTPUT

FS02

0 to 200V

50mA

0 to 10W

FS03

0 to 300V

33.3mA

0 to 10W

FS05

0 to 500V

20mA

0 to 10W

FS10

0 to 1kV

10mA

0 to 10W

FS20

0 to 2kV

5mA

0 to 10W

FS30

0 to 3kV

3.33mA

0 to 10W

FS40

0 to 4kV

2.5mA

0 to 10W

FS50

0 to 5kV

2mA

0 to 10W

FS60

0 to 6kV

1.67mA

0 to 10W

200V to 6kV at 10W

FS SERIES

ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS

Proven

Reliability

FEATURES

• Output Proportional and Linear to Input

<0.7V Turn-On Voltage

•

SMART FEATURES for Enhanced Reliability:

Over-Temperature Protection with Automatic Shutdown and Error Code

Over-Voltage Protection with Automatic Shutdown and Error Code Output

• Disable Pin, TTL Compatible High=Off

• No Minimum Load Current Required

• Low-Noise, Quasi-Sinewave Oscillator

• Inaudible >25kHz Oscillator, Low EMI/RFI

• Low Conducted Emissions and Low Input Ripple Current

• Stable Operating Frequency Over Entire Operating Range

• High Input to Output Galvanic Isolation

• Very Low Input/Output Leakage Current: <100nA

• Very Low Input/Output Coupling Capacitance: <100pF

• Reversible Output Polarity (4kV Modules and Below)

• High Efficiency, No Derating Required

• Robust Design: Conservative Internal High Voltage Clearance and Voltage

Gradient Control for Exceptional Long-Term Reliability

• Output Surge Current Limited

• High Reliability: MTBF > 840,000 Hours per Belcore TR 332

• Excellent Internal Thermal Management

• Anodized Aluminum Heatsink Surface

• Two Threaded, Blind Inserts Allow for Easy Heatsinking and/or

Chassis Mounting Options

• UL Certified Encapsulant, Meets 94V-0 Flammability

• RoHS Compliant

• Available in Four Standard Input Voltage Ranges: 0–12, 15, 24, and 28V.

(For Other Input / Output Voltages, Consult Factory)

• Polarity: Choose Negative or Positive Outputs for Models FS50 and FS60

• Dual Output (Center Tap): Available for Models FS02CT through FS40CT

• B Version - Without Enhanced Features. See ‘B’ Drawing.

• Extended Environmental Screening and Burn-In Available, Consult Factory

• Electrophoresis

• Piezo Devices

• Capacitor Charging

• Mass Spectrometry

• Electrostatic Chucks

APPLICATIONS

OPTIONS

PRODUCT DESCRIPTION

PRODUCT SELECTION TABLE

The new FS Series of isolated, proportional DC to high voltage DC

converters offers stout design and enhanced features for excellent

long term reliability. Outputs ranging from 200V through 6kV are of-

fered in miniature, cost-effective, PC-mount packages. Based on XP

EMCO’s proven high-reliability, high voltage power conversion topol-

ogy, the FS Series boasts a full ten watts of output power for each

model and features a low 0.7V turn-on voltage. The output voltage

is proportional to the input voltage, from turn on to maximum output

voltage, enabling easy control of the high voltage. XP EMCO’s pro-

prietary, quasi-sinewave, resonant oscillator produces clean, reliable

high voltage with inherently low ripple, low EMI/RFI, low input ripple

current, and low conducted emissions. Additional features such as

over-temperature protection are available.