ABSOLUTE MAXIMUM RATINGS

REGULATORY INFORMATION

ISO150

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

SPECIFIED

TRANSPORT

PACKAGE

PACKAGE

PACKAGE

ORDERING

PRODUCT

TEMPERATURE

MEDIA,

LEAD

DESIGNATOR

MARKING

NUMBER

RANGE

QUANTITY

ISO150AU

Rails, 28

ISO150AU

SO-28

DVB

–40°C to 85°C

ISO150AU

ISO150AU/1K

Tape and Reel, 1000

(1)

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

website at www.ti.com.

over operating free-air temperature range (unless otherwise noted)

(1) (2)

UNIT

Storage temperature

–40°C to 125°C

Supply voltage

–0.5 V to 6 V

Transmitter input voltage

Receiver output voltage

Isolation voltage dV/dt

500 kV/

µs

Short to ground

Continuous

Junction temperature

125°C

Lead temperature (soldering, 10s)

260°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability.

(2)

This isolator is suitable for basic insulation applications within the safety limiting data. Maintenance of the safety data must be ensured

by means of protective circuitry.

UL

File Number: E181974

(1)

Production tested at 2400 VRMS for 1 second in accordance with UL 1577.

2

Submit Documentation Feedback

Copyright © 2000–2008, Texas Instruments Incorporated

Product Folder Link(s): ISO150