(1) Mating/ un-mating

(2) Cable handling

(3) Precautions

1) Mating.

mated condition.

2) Un-mating.

Do not twist, apply excessive forces or sharp bends to the cable.

Do NOT forcefully twist or deform wires.

6

sUsage Precautions

1. Plugs

2. Receptacles

W.FL-LP-040

Cable Assembly

W.FL-R-SMT-1

2N max

∞

∞

Preheating (130ç to 165ç)

Within 2 minutes

40 to 50 seconds

Time

80

100

120

140

160

180

200

220

240

260

Peak temperature and time

240ç 3 seconds

183ç

[ç]

W.FL Cable

Assembly

W.FL-R-SMT-1

W.FL-LP-N plug extraction tool

The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.

(1) Recommended soldering

temperature profile

(2) Recommended screen thickness

0.1 to 0.12 mm

1) The temperature profile indicates the board surface temperature at the point of contacts with the connector

terminals.

2) The temperature may vary, depending on the board size, the solder paste type and thickness.

Receptacle

The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.

5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN

PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933

http://www.hirose.com

http://www.hirose-connectors.com

®

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.