2

WARRANTY

PART NUMBER DESIGNATION

SPECIFICATIONS

This product is covered by a warranty for a period of one year from the date of delivery. This warranty covers free-of-charge repair and

replacement for defects occurring through design or manufacturing inadequacy of NIDEC COPAL ELECTRONICS CORP. Even during the

warranty period, the following failures will be handled on a fee basis.

①Failures or damages occurring through misuse or disoperation performed not following the instruction manual.

②Failures or damages occurring through improper modification, adjustment,or repair.

③Failures or damages occurring through natural calamities, fires or other inevitable accidents.

④Failures or damages occurring through permeation of corrosive gases.

WIRING

・When wiring or changing wire, please turn off the power. Care must be taken when checking operations by connecting wires with clips.

・Please make sure of appropriate wiring before turning on the power.

・The wires should be connected as shown in the below.

PA ̶708 ̶ 602R ̶ 10 ̶ PB

Pressure range

102R：-100 to 100kPa

302R：-100 to 300kPa

602R：-100 to 600kPa

Thermal error

10：±0.1％FS/℃

Material of pressure port

PB：PFA

102R

302R

602R

Rated pressure range

maximum pressure

Break-down pressure

Medium

Diameter of pressure port

Thickness of diaphragm

Dielectric strength

Pressure medium temp.range

Operating temp.range

Storage temp.range

Operating humidity range

Supply voltage

Load resistance

Linearity

Thermal error

Izero

Ispan

Model

Corrosive gases/liquids compatible with Fluorocarbon resin（PFA）

O.D.φ1/2in I.D.φ3/8in

4±0.2mA

16±0.2mA

500VAC,1min.（Leakage current 1mA max.）

10 to 80℃

10 to 50℃

-20 to 80℃（Atmospheric pressure,humidity 65％RH max.）

35 to 85％RH（No condensation）

24VDC±10％（with ripple content）

500Ωmax.

±0.1％F.S./℃（10 to 80℃ reference temp. at 25℃）

（0.5mm）

（0.8mm）

±1.0％F.S.

±1.5％F.S.

−100 to 600kPa

1200kPa

1800kPa

−100 to 300kPa

600kPa

1200kPa

−100 to 100kPa

200kPa

400kPa

Wire color

Red

Black

White

Green

Shield

Connection

Power（＋）

Ｎ.Ｃ.

Analog output

Ｎ.Ｃ.

…………

Output