TP/TPL

■Optional Accessories

 

《Sold separately》

Color Button

（Illuminated）

Dimensions

（ABS）

Clear

140007480466

140007480467

Red Clear

140007480238

140007480276

Green Clear

140007480239

140007480277

Yellow clear

140007480240

140007480278

：Optional Accessories

■7HJRHNPUN :WLJPÄJH[PVUZ

 

Zipper Plastic Bag

50

■:VSKLYPUN :WLJPÄJH[PVUZ

⑴ Manual Soldering

   Device: Soldering iron

①380°

C, Max.; 3 seconds, Max.

⑵ Wave Soldering

   Device: Jet wave type or dip type

①245°

C; 3 seconds, Max.

・Pre-heating should be done at temperatures below 80°

C to

120

°

C and within 120 seconds.

・For TPL type, soldering should be done with the lock released.

⑴ Operating force should be 9.8 N or less.

⑵ Do not operate the switch right after soldering.

⑶ Do not solder the switch with the actuator pressed down.

■Flux Cleaning

⑴ Solvents : Fluorine or Alcohl type

⑵ The TP/TPL series are not washable. To wash the PC board,

clean the soldering surface of the PC board with a brush so

that the switch is not exposed to the cleaning solution.

⑶After soldering, wait until the temperature of the terminals

cool down to 90

℃ or below or until the parts are exposed

to room temperature for more than 5 min. before washing.