| 数据搜索系统,热门电子元器件搜索 |
|
MCS3142 数据表(PDF) 28 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCS3142 数据表(HTML) 28 Page - Microchip Technology |
|
28 / 57 page ![]() MCS3142 DUAL KEELOQ® ENCODER WIRELESS REMOTE CONTROL DEVELOPMENT KIT USER’S GUIDE 2014 Microchip Technology Inc. DS40001746A-page 27 Chapter 6. Developing with the MCS3142 Wireless Security Remote Control Development Kit 6.1 INTRODUCTION The software on the demo board was constructed so that a developer can easily customize the existing code base. The entire code is written in ‘C’ and has clearly documented sections where the developer can insert custom code. 6.2 PROGRAMMING THE MCS3142 Since the MCS3142 is a hardware encoder, its entire memory map cannot be programmed. Only portions of the MCS3142 memory are programmable. Please see Section 7.3.3 “Generate Source” for more information on how to generate code for the MCS3142 via the MPLAB X KEELOQ plugin. To modify the configuration data in the key fob, the developer needs to open the red plastic enclosure. The ICSP™ port is available on the key fob PCB as six contact areas. The following steps need to be followed to program the MCS3142: • Remove the PCB board from the plastic enclosure and lay the PCB board on a non-conductive surface. • Align the six ICSP pins to the contact areas on the PCB. Push the ICSP pins to the contact areas and avoid any movement during programming. 6.3 DEVELOPING WITH THE EMBEDDED SECURITY BOARD The Embedded Security Development Board acts as a receiver in the MCS3142 Wireless Security Remote Control Development Kit. The target application microcontroller on the right side of the development board interacts with the receiver. All data receiving and KEELOQ security functionalities are performed by the target application microcontroller. The host microcontroller is only used to drive the LCD display and package data for the PC interface. The developer should only need to develop on the target side. The prototyping area under the four push buttons for target application controller can be used to prototype the application. Note: Avoid touching the PCB antenna when testing. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |