OMAP3530ECBBA datasheet(123/265 Pages) TI1

123 / 265 page

OMAP3530, OMAP3525

www.ti.com

SPRS507H – FEBRUARY 2008 – REVISED OCTOBER 2013

3.3

Recommended Operating Conditions

All OMAP3530/25 modules are used under the operating conditions contained in Table 3-3. The

information in the notes below is provided solely for convenience and does not extend or modify the

warranty provided under TI's standard terms and conditions for TI semiconductor products.

Note (POH Limitations):

To avoid significant device degradation for commercial temperature OMAP3530/OMAP3525 devices (0°C

≤ Tj ≤ 90°C), the device power-on hours (POH) must be limited to one of the following:

•

100K total POH when operating across all OPPs and keeping the time spent at OPP5-OPP6 to less

than 23K POH.

•

50K total POH when operating at OPP5 - OPP6.

•

44K total POH with no restrictions to the proportion of these POH at operating points OPP1 - OPP6.

To avoid significant device degradation for extended temperature OMAP3530A/OMAP3525A devices (-

40°C

≤ Tj ≤ 105°C), the following restrictions apply:

•

OPP5 and OPP6 are not supported.*

•

The total device POH must be limited to less than 50K.*

*If an extended temperature device is operated such that Tj never exceeds 90C (-40°C ≤Tj ≤ 90°C) then

the OPP POH limits for commercial devices indicated above apply.

Note: Logic functions and parameter values are not guaranteed out of the range specified in the

recommended operating conditions. The above notations cannot be deemed a warranty or deemed to

extend or modify the warranty under TI's standard terms and conditions for TI semiconductor products.

Table 3-3. Recommended Operating Conditions

PARAMETER

DESCRIPTION

MIN

NOM

MAX

UNIT

VDD1 (vdd_mpu

OMAP processor logic supply

OPP6: Overdrive (1)

VDD1NOM -

1.35

VDD1NOM +

_iva),

(0.05*VDD1NOM)

SmartReflex

OPP5: Overdrive

VDD1NOM -

1.35

VDD1NOM +

Disabled

(0.05*VDD1NOM)

OPP4: Mid-Overdrive

VDD1NOM -

1.27

VDD1NOM +

(0.05*VDD1NOM)

OPP3: Nominal

VDD1NOM -

1.20

VDD1NOM +

(0.05*VDD1NOM)

OPP2: Low-Power

VDD1NOM -

1.06

VDD1NOM +

(0.05*VDD1NOM)

OPP1: Ultra Low-

VDD1NOM -

0.985

VDD1NOM +

Power(2)

(0.05*VDD1NOM)

VDD2 (vdd_core) OMAP core logic supply

(3)

OPP3: Nominal

VDD2NOM -

1.15

VDD2NOM +

SmartReflex

(0.05*VDD2NOM)

Disabled

OPP2: Low-Power

VDD2NOM -

1.06

VDD2NOM +

(0.05*VDD2NOM)

OPP1: Ultra Low-

VDD2NOM -

0.985

VDD2NOM +

Power(2)

(0.05*VDD2NOM)

vdds

Supply voltage for I/O macros

1.71

1.8

1.91

Noise (peak-peak)

mVpp

vdds_mem

Supply voltage for memory I/O macros

1.71

1.8

1.89

Noise (peak-peak)

mVpp

vdds_mmc1

Supply voltage range for MMC1

1.8-V mode

1.71

1.8

1.89

CMD, CLK and DAT[3:0] and for

3.0-V mode

2.7

3.0

3.3

memory stick I/Os

(1)

OPP6 is only supported on high-speed grade OMAP3530/25 devices.

(2)

Cannot boot in OPP1. If OPP1 is desired, boot in higher OPP then switch to OPP1.

(3)

Core logic includes interconnect, graphics processor, and peripherals.

ELECTRICAL CHARACTERISTICS

123

Submit Documentation Feedback

Product Folder Links: OMAP3530 OMAP3525

OMAP3530ECBBA 数据表(PDF) 123 Page - Texas Instruments

OMAP3530ECBBA 数据表(HTML) 123 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

OMAP3530ECBBA 数据表(PDF) 123 Page - Texas Instruments

OMAP3530ECBBA 数据表(HTML) 123 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载