Product # MQME-270-R

Phone 1-888-567-9596

www.synqor.com

Doc.# 005-0006166 Rev. E

05/31/2016

Page 4

MQME-270-R

Technical Specification

MQME-270-R Electrical Characteristics (Continued)

Parameter

Min. Typ. Max. Units Notes & Conditions

Group A

Specifications subject to change without notice

Vin=270V DC ±5%, P= 320W unless otherwise

specified

ISOLATION CHARACTERISTICS

Isolation Voltage (any pin to case)

Continuous

-500

500

V

1

Transient (≤ 100 µs)

-800

800

V

Isolation Resistance (any pin to case)

100

MΩ

1

RELIABILITY CHARACTERISTICS

Calculated MTBF (MIL-STD-217F2)

GB @ Tcase = 70ºC

17.5

AIF @ Tcase = 70ºC

887

WEIGHT CHARACTERISTICS

Device Weight

79

g

Electrical Characteristics Notes

1. While the filter will survive these input voltage limits, the filter's output voltage will be outside the limits for an MQFL converter input voltage range.

2. Verified by qualification testing and analysis.

3. Only the ES and HB grade products are tested at three temperatures. The C grade products are tested at one temperature. Please refer to the

Construction and Environmental Stress Screening Options table for details.

4. With an external 2uF capacitor in series with a 5ohm resistor connected across the output of the MQME filter module.

5. Product of input current and output voltage must be less than 320W

6. The specified operating case temperature for ES grade products is -45ºC to 100ºC. The specified operating case temperature for C grade products

is 0ºC to 70ºC.

* Rs = Source Impedance