| 数据搜索系统,热门电子元器件搜索 |
|
ISD1016API 数据表(PDF) 7 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
ISD1016API 数据表(HTML) 7 Page - List of Unclassifed Manufacturers |
|
7 / 20 page ![]() Product Data Sheets ISD1000A Series 1–7 1 LOW-going CE signal, at which point the current address/mode levels are sampled and executed. NOTE The two MSBs are on pins 9 and 10 for each ISD1000A Series member. OPERATIONAL MODES DESCRIPTION The Operational Modes can be used in conjunc- tion with a microcontroller, or they can be hard- wired to provide the desired system operation. M0 — Message Cueing Message Cueing allows the user to skip through messages, without knowing the actual physical addresses of each message. Each CE LOW pulse causes the internal address pointer to skip to the next message. This mode should be used for Playback only, and is typically used with the M4 Operational Mode. M1 — Delete EOM Markers The M1 Operational Mode allows sequentially recorded messages to be combined into a single message with only one EOM marker set at the end of the combined message. When this operational mode is configured, messages recorded sequen- tially are played back as one continuous mes- sage. M2 — Used for Cascading During playback, EOM goes LOW at array over- flow only. Normal EOM pulses are turned off. M3 — Message Looping The M3 Operational Mode allows for the auto- matic, continuously repeated playback of the message located at the beginning of the address space. A message CANNOT completely fill the ISD1000A device and loop. M4 — Consecutive Addressing During normal operations, the address pointer will reset when a message is played through to an EOM marker. The M4 Operational Mode inhibits the address pointer reset on EOM, allowing mes- sages to be played back consecutively. M5 — CE Level Activated The default mode for ISD1000A devices is for CE to be edge-activated on Playback and level-acti- vated on Record. The M5 Operational Mode causes the CE pin to be interpreted as level-acti- vated as opposed to edge-activated during Play- back. This is specifically useful for terminating Playback operations using the CE signal. In this mode, CE LOW begins a Playback cycle at the beginning of device memory. 06.DataBook_1000A Dsht Page 7 Friday, September 27, 1996 10:44 AM |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |