MMD Monitor/Quartztek

30400 Esperanza, Rancho Santa Margarita, CA, 92688

Sales@mmdcomp.com

07/19/11 G

Subject to change without notice

Pg 2 of 2

Revision:

Part Number Guide

Mechanical Details

Tape & Reel Dimensions

PIN 1

PIN 2

PIN 3

PIN 4

TRI-STATE or NC

GROUND

OUTPUT

SUPPLY VOLTAGE

PIN CONNECTIONS

External Bypass Capacitor is Recommended

Dimension in Brackets are in Inches

Suggested

Land Pattern

9.80 [.386]

MAX

14.00 [.551]

MAX

4.70 [.185]

MAX

5.08 [.200]

0.84 [.033]

PIN 1 INDICATOR

1

23

4

7.87 [.310]

5.08 [.200]

1.02 [.040]

2.50 [.098]

7.62 [.300]

Output

H = HCMOS

T = TTL

Symmetry *

Blank = 40/60%

A = 45/55%

B = 47.5/52.5%

Pin 1 Connection

Blank = No Connection

H = Tri-state

Ceramic SMD 4 J-Lead

ML

Frequency

Option B (47.5/52.5%) Avaible up to 50MHz only

Please Consult with MMD Sales Department for any other Parameters or Options

Operating Temperature

Blank = 0°C to +70°C

27 = -20°C to +70°C

48 = -40°C to +85°C

55 = -55°C to +125°C

Frequency

Stability

020 = ±20 ppm

025 = ±25 ppm

050 = ±50 ppm

100 = ±100 ppm

Jitter

1 = 1 pSec typ

P = 10 pSec typ

Supply Voltage

5 = +5.0VDC

3 = +3.3VDC

RoHS Compliant

Blank = Not Compliant

F = is Compliant

Blank = Bulk

T = Tape & Reel

Package

PITCH

PITCH

12.00 [.471]

TAPE WIDTH

24.00 [.945]

DIRECTION OF FEED

330 [13.0]

REEL DIA

NOTES: UNLESS OTHERWISE SPECIFIED

1. Applicable Standards / Specifications

ANSI Y14.5M, Dimensions and Tolerances

EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm

Punched Carrier Taping of Surface Mount Components for Automatic Handling.

2. Dimensions are in millimeters [inch].

3. Tolerances are ±0.1 [.004] mm unless otherwise specified.

4. Do not scale drawing.

REEL DIA

Q1 Q2

Q3 Q4

Q1 Q2

Q4

Q3

PIN 1 ORIENT.

Q1

Tape Width

NOTES: UNLESS OTHERWISE SPECIFIED

1. Applicable Standards / Specifications

ANSI Y14.5M, Dimensions and Tolerances

EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm

Punched Carrier Taping of Surface Mount Components for Automatic Handling.

2. Dimensions are in millimeters [inch].

3. Tolerances are ±0.1 [.004] mm unless otherwise specified.

4. Do not scale drawing.