2015-11-25

20

Version 2.1 (not for new design)

LE ATB N7WM

Wegen der Streichung der LED aus der IEC 60825 erfolgt die Bewertung der Augensicherheit nach dem Standard IEC

62471:2006 ("photobiological safety of lamps and lamp systems")

Im Risikogruppensystem dieser CIE- Norm erfüllen die in diesem Datenblatt angegebenen LED die "moderate risk"-

Gruppe (die die sich im "sichtbaren" Spektralbereich auf eine Expositionsdauer von 0,25 s bezieht). Unter realen

Umständen (für Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei

Augengefährdung aus.

Grundsätzlich sollte jedoch erwähnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundäres

Gefahrenpotenzial besitzen. Wie nach dem Blick in andere helle Lichtquellen (z.B. Autoscheinwerfer) auch, können

temporär eingeschränktes

Sehvermögen und

Nachbilder je nach Situation zu Irritationen, Belästigungen,

Beeinträchtigungen oder sogar Unfällen führen.

Due to the cancellation of the LED from IEC 60825, the evaluation of eye safety occurs according to the standard IEC

62471:2006 ("photobiological safety of lamps and lamp systems").

Within the risk grouping system of this CIE standard, the LEDs specified in this data sheet fall into the "moderate risk"

group (relating to devices in the visible spectrum with an exposure time of 0.25 s). Under real circumstances (for exposure

time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a

matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential

due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction

in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents,

depending on the situation.

Attention please!

The information describes the type of component and shall not be considered as assured characteristics.

Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous

substances. For information on the types in question please contact our Sales Organization.

If printed or downloaded, please find the latest version in the Internet.

Packing

Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By

agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is

returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.

Components used in life-support devices or systems must be expressly authorized for such purpose! Critical

components

OS.