| 数据搜索系统,热门电子元器件搜索 |
|
F2867G-P16-R 数据表(PDF) 4 Page - Unisonic Technologies |
|
|
|||||||||||||||||||||||||||||
F2867G-P16-R 数据表(HTML) 4 Page - Unisonic Technologies |
|
4 / 6 page ![]() F2867 Advance LINEAR INTEGRATED CIRCUIT UNISONICTECHNOLOGIESCO.,LTD 4 of 6 www.unisonic.com.tw QW-R109-038.a ABSOLUTE MAXIMUM RATING (TA=25°C unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT VCC Pin Maximum Supply Voltage VCC max 18 V OUTN Pin Maximum Output Current IOUTN max 20 mA OUTP Pin Maximum Sink Current IOUTP max 20 mA OUT Pin Output Withstand Voltage VOUT max 18 V VTH, RMI Pins Withstand Voltage VVTH, VRMI max 7 V S-S Pin Withstand Voltage VS-S max 7 V FG Output Pin Withstand Voltage VFG max 19 V FG Pin Maximum Output Current IFG max 10 mA 5VREG Pin Maximum Output Current I5VREG max 20 mA Allowable Power Dissipation (with specified substrate (Note 1)) Pd max 800 mW Operating Temperature (Note 2) Topr -30 ~ +95 °C Storage Temperature Tstg -55 ~ +150 °C Notes: 1. All typical values are at VCC=3.3V or VCC=5.0V, and TA=25°C. 2. Specified substrate: 114.3mm×76.1mm×1.6mm, glass epoxy board. 3. TJ max=150°C must not be exceeded. RECOMMENDED OPERATING CONDITIONS (TA=25°C unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT VCC Supply Voltage VCC 5.5~16 V VTH, RMI Input Voltage Range VTH, RMI 0~5 V Hall Input Common-Phase Input Voltage Range VICM 0.2~3 V ELECTRICAL CHARACTERISTICS (VCC=12V, TA=25°C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT ICC1 During drive 5.5 7.5 9.5 mA Circuit Current ICC2 During lock protection 5.5 7.5 9.5 mA 5VREG Voltage 5VREG I5VREG = 5mA 4.80 4.95 5.10 V Current Limiting Voltage VLIM 185 200 215 mV CPWM Pin “h” Level Voltage VCPWMH 2.8 3.0 3.2 V CPWM Pin “L” Level Voltage VCPWML 0.9 1.1 1.3 V CPWM Pin Charge Current ICPWM1 VCPWM=0.5V 24 30 36 μA CPWM Pin Discharge Current ICPWM2 VCPWM=3.5V 21 27 33 μA CPWM Oscillation Frequency FPWM C=220PF 30 kHz CT Pin “H” Level Voltage VCTH 2.8 3.0 3.2 V CT Pin “L” Level Voltage VCTL 0.9 1.1 1.3 V CT Pin Charge Current ICT1 VCT=0.5V 1.6 2.0 2.5 μA CT Pin Discharge Current ICT2 VCT=3.5V 0.16 0.20 0.25 μA CT Pin Charge/Discharge Ratio RCT ICT1/ICT2 8 10 12 times S-S Pin Discharge Current IS-S VS-S=1V 0.4 0.5 0.6 μA OUTN Output H-level Voltage VONH IO=10mA VCC-0.85 VCC-1.00 V OUTN Output L-level Voltage VONL IO=10mA 0.9 1.00 V OUTP Output L-level Voltage VOPL IO=10mA 0.5 0.65 V Hall Input Sensitivity VHN IN +, IN- differential voltage (including offset and hysteresis) ±10 ±20 mV FG Output L-level Voltage VFGL IFG=5mA 0.15 0.30 V FG Pin Leakage Current IFGL VFG=19V 20 μA VTH/RMI Pin Bias Current IVTH/IRMI CPWM=VTH/RMI=2V 0.1 μA |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |