B130

DF6 Series

■Product Specifications

Rating

Current rating

(Note 1)

Voltage rating

AWG 18 :

5A

Cable size

AWG 20 :

4A

AWG 22 :

3A

300V AC

Operating Temperature Range

Operating Moisture Range

Storage Temperature Range

Storage Humidity Range

40 to 80%

-10 to +60ç (Note 2)

40 to 70% (Note 2)

Note 1: The rated current will be changed according to cable sizes for use.

Note 2: Includes temperature rise caused by current flow.

Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

Note 4: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and specifications for

a specific part number shown.

Item

Specification

Condition

1.Insulation Resistance

1000M ohms min.

500V DC

2.Withstanding voltage

No flashover or insulation breakdown.

1500V AC/1 minute

3.Contact Resistance

15m ohms max.

100mA

4.Vibration

No damage, cracks, or parts looseness.

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.

5.Humidity (Steady state) No damage, cracks, or parts looseness.

96 hours at temperature of 40ç and humidity of 90% to 95%

6.Temperature Cycle

No damage, cracks, or parts looseness.

(-55ç: 30 minutes

➝15 to 35ç: 10 minutes➝85ç: 30 minutes➝ 5 to 35ç: 10 minutes ) 5 cycles

7. Resistance to Soldering heat No deformation of components affecting performance.

Flow: 250ç for 10 seconds

Manual soldering: 300ç for 3 seconds

■Material

Product

Part

Material

Finish

Remarks

Crimping Plug

Insulator

Polyamide

White

UL94V-0

Crimping Contact for Plug

Brass

Copper Alley

Tin plated

________

■Ordering Information

DF6

- * P - 3.96 C

qe

wr

t

: DF 6

P: Plug

●Crimping Plug

DF6A - 1822 PCF

qw

e

PCF: Plug contact, reel packaging

SC: Plug contact, bag packaging

None : Jacket dia. 1.5mm to 2.2mm

UL 1007

A

: Jacket dia. 2.2mm to 2.9mm

UL 1015

1822 : AWG#18~#22

●Crimping Contact

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.