1

2014.8

e

1mm Pitch, Board to Wire Lock Connector

DF50 Series

■Features

1. It provides clear tactile click and secure

mating

Locking function and contact mating occur

simultaneously, for a clearer tactile click.(Fig.1)

2. Robust structure resistant to wrenching

forces

Thick and robust housing wall provides higher

strength against cracking. Insertion depth for mating

housings protects against wrenching.(Fig.2)

3. Robust and reliable lance structure

High lance strength by mating with crimp contact on

the surface.(Fig.3)

4. Ensured adsorption area eliminates the

need for adsorption cap.

Adequate adsorption area is ensured despite the

small size, allowing for automatic mounting without

adsorption cap.

(*Specifications for adsorption cap may be provided

according to your requirements)

5. Insulation outer diameter Ø0.9mm,

compatible with AWG#28

Despite 1 mm Pitch, it is compatible with Ø0.9mm,

UL1061·AWG#28 Cable (Ø0.127×7)

It provides clear tactile click and secure mating

Robust structure resistant to wrenching forces

Robust and reliable lance structure

Simultaneous timing of locking function and

contact mating provides a clearer tactile click.

It is possible to visually inspect

the assembled lance.

The lance mates with the crimp

contact on the surface.

Timing of locking function

Insertion depth for mating protects against

wrenching.

Thick and robust outer wall provides higher

strength and prevents cracking.

Fig.1

Fig.2

Fig.3