2

10-2014, Rev. 1014

www.te.com

© 2014 Tyco Electronics Corporation,

a TE Connectivity Ltd. company.

Catalog and product specification according

to IEC 61810-1 and to be used only together

with the ‘Definitions’ section.

Catalog and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Definitions’ section, available at

http://relays.te.com/definitions

Catalog product data, ‘Definitions’ section,

application notes and all specifications are

subject to change.

SCHRACK

General Purpose

Low Power PCB Relays

Terminal type

PCB-THT, plug-in

reflow version

PCB-THR

Mounting distance, AC coil

≥2.5mm

Weight

13g

Resistance to soldering heat THT, IEC 60068-2-20

RTII

270°C/10s

RTIII

260°C/5s

Resistance to soldering heat THR

reflow soldering (for reflow version)

temperature profile

according EN61730

Packaging/unit

tube/20pcs., box/500pcs.

4) infrared heating not allowed.

5) recommended fluid LS/230.

Accessories

For details see datasheet

Accessories Industrial Power Relay RT

NOTE: indicated contact ratings and electrical endurance data for direct

wiring of relays (according IEC 61810-1); for relays mounted on sockets

deratings may apply.

Insulation Data

Initial dielectric strength

between open contacts

1000V

rms

between contact and coil

5000V

rms

between adjacent contacts

2500V

rms

Clearance/creepage

between contact and coil

≥10/10mm

between adjacent contacts

≥3/4mm

Material group of insulation parts

IIIa

Tracking index of relay base

PTI 250V

reflow version

PTI 175V

Other Data

Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content

refer to the Product Compliance Support Center at

www.te.com/customersupport/rohssupportcenter

Resistance to heat and fire

WG version or reflow version

according EN60335, par30

Ambient temperature

DC coil

-40 to 85°C

AC coil

-40 to 70°C

AgSnO

-40 to 70°C

Category of environmental protection, IEC 61810

standard version

RTII - flux proof, RTIII - wash tight

reflow version

RTII - flux proof

Vibration resistance (functional),

form A/form B contact, 30 to 300Hz

20g/5g

Shock resistance (destructive)

100g

PCB layout / terminal assignment

Bottom view on solder pins

2 form C (CO) contacts

2 form A (NO) contacts

*) With the recommended PCB hole sizes a grid

pattern from 2.5mm to 2.54mm can be used.

Dimensions

Process conditions for Reflow soldering

according to EN61760-1

THT version

THR version (reflow solderable)